Yiwu, China · Founded 2022

Small-Batch China Sourcing: 50 and 100 Unit Custom Runs

Small-batch sourcing means placing a production run below a factory's standard minimum — typically 50–100 units instead of 500–3,000. Yeatru Sourcing makes that possible for first-time importers, independent brands, Amazon FBA launches and new private-label brands, from one Yiwu office.

Yeatru Sourcing accepts custom and private-label orders from 50 pieces per SKU, charges a published 5–8% commission, inspects every batch to AQL 2.5 and ships DDP to 50+ countries. Stock catalogue items start at 1 piece.

50 pcs minimum per SKU 5–8% published fee AQL 2.5 inspection DDP to 50+ countries

Written quotation within 24 hours · no obligation · no fee until you confirm an order.

Small-batch cartons consolidated in the Yeatru Yiwu warehouse
2022
Company registered
21 February 2022
14+
Years of founder
procurement experience
200+
Buyers served
in 50+ countries
15 days
Free consolidation
storage in Yiwu
Four buyer profiles

Who we build small batches for

Same team and same published fees — different starting points.

New B2B importers and small distributors

You are opening a category, not filling a container. We verify the factory, quote a real landed cost in EXW, FOB or DDP, and tell you which certifications apply before you pay a deposit.

First-order checklist →

Independent brands testing 50–100 units

One or two SKUs, your logo and label, a batch small enough to sell out or pivot. We match the factory line to the run length instead of forcing you into 500-piece stock.

Low-MOQ playbook →

Amazon FBA private-label launches

A first SKU that must arrive FBA-ready: FNSKU labels, polybag choking warnings, carton weights and a DDP leg to the fulfilment centre — after an AQL 2.5 inspection.

FBA sourcing detail →

New brands built from zero

Spec sheet, label artwork, packaging dieline, compliance route and first production run. You bring the idea and the market; we turn it into a document a factory can quote from.

OEM & private label →

What changes between 50, 100 and 300 units

Honest guidance on where a batch size stops paying for itself.

Batch sizeBest used forPackaging and labellingWhat we usually recommend
50 unitsTesting one variant, one colour or one market before committing cashYour logo and a printed label are usually possible; printed retail boxes often are notKeep to a stock carton plus a label, and reinvest after the first sell-through
100 unitsA first Amazon listing or a Shopify drop with two variantsCustom label, hang tag and polybag printing become realisticThe best balance of test size and unit price for most first launches
300–500 unitsProven demand, a second colour or a wholesale enquiryCustom retail packaging and inserts usually make sense hereMove to sea freight and a custom box once the listing is converting

Thresholds vary by material and factory line. We confirm the real minimum for your product in the quotation rather than quoting a number we cannot hold.

Published fees, before you order

A small order is judged on its total cost, not on the headline commission. These are the rates that appear in every Yeatru quotation and again in the invoice.

Full schedule on service plans and value-added services.

Ask for a cost breakdown
ItemRateWhen it applies
Regular sourcing5–8%On confirmed order value, tiered by order size
OEM / private label8–12%Custom artwork, packaging, label or product changes
Low-order surcharge10%Orders below USD 1,000
Handling feeUSD 50Per order, stated in the quotation
SampleUSD 50 / SKURefundable against the first purchase order
Inspection — ZhejiangUSD 250 / dayYiwu, Ningbo and nearby factories
Inspection — GuangdongUSD 350 / dayGuangzhou, Shenzhen, Dongguan

Quotation and cost breakdown are free. Commission is charged only when you confirm an order.

What is included in a small batch

The same workflow a large order gets, scaled to the run.

Factory shortlist

Business licence and scope check, then shortlisted factories that actually accept your quantity.

Spec sheet

Materials, dimensions, colour, packing and tolerances written so every factory quotes the same product.

Sampling

Samples photographed against the spec, consolidated into one parcel instead of five courier bills.

AQL 2.5 inspection

Pre-shipment inspection with defect counts, measurements, dated photos and a written report.

Label and packaging

Artwork review, dieline check and print proof approval before the factory prints.

FBA prep

FNSKU labels, polybag warning, carton marking and weight checks for Amazon inbound.

Consolidation

Cartons from several factories checked in at our Yiwu warehouse and held free for 15 days.

Documents and DDP

PI, CI, packing list, certificate of origin and HS codes, with duty and VAT included on DDP terms.

Where small batches go wrong — and what we check

Most first-order losses are not price problems. They are specification, labelling and compliance problems.

Compliance route

Before production we confirm which rules apply to the destination: CE marking for the relevant directives, REACH restricted substances, EN71 for toys, UKCA for Great Britain and GPSR for the EU. GPSR, in force since 13 December 2024, also requires an EU-based responsible person and traceability details on the product or packaging — a requirement many first-time sellers discover at customs.

Label and artwork

Symbols, warnings, material composition, country of origin, batch code and importer details have to fit on a small label without losing legibility. We review the artwork before the print run, because reprinting labels costs more than the labels.

Material and safety

A factory's standard material is not always the material your market accepts. We flag food-contact, children's-product and chemical restrictions early and coordinate the lab tests the factory must supply — the importer of record still holds legal responsibility.

Tolerances and packaging

Colour drift against an approved sample, size tolerance, carton drop strength and net weight are checked against the spec sheet, not against memory. On a 50-unit run one bad carton is 2% of your stock.

Two recent small-batch engagements

Client names withheld; scope and outcome as delivered.

Amazon Europe · first SKU United States client

Entry doormat: from project set-up to factory inspection and shipment

A US-based seller launching an Amazon Europe brand needed the first product delivered before committing to a wider range. We set up the project, aligned the specification with the factory, inspected the production run on the factory floor with dated photo evidence, and shipped the batch.

Delivered: 500-piece microfibre entrance mat (60 × 90 cm, sand mélange, USD 4.00 EXW), inspected and shipped — proforma total USD 2,160.

Read the case →
Brand owner · first product Lithuania founder

Brand owner's first product, from spec sheet to label design

A Lithuanian founder building his own brand needed a first product he could actually manufacture. We developed it with him — product specification, label artwork, production follow-up and shipment.

Delivered: YCS-LTW-902A 7-component own-brand set (all black), with Yeatru-authored spec sheet and label artwork including a not-a-toy / activated-charcoal safety warning.

Read the case →

More engagements — including a 100-piece apparel order for a first-time buyer — are on the case studies page.

From enquiry to shipped batch

Six steps, each with a document you can check.

01

Written brief

Product, quantity, target price, destination and certification needs. Quotation within 24 hours.

02

Factory shortlist

Licence checks and quotes from factories that accept the run length, not only the large ones.

03

Sample and spec

Sample against the spec sheet; artwork and label proof approved before printing.

04

Production follow-up

Material and in-line checks, with photo updates before the balance payment.

05

AQL 2.5 inspection

Defect counts and measurements against the spec; rework at the factory's cost if the batch fails.

06

Consolidation and DDP

Cartons checked in, stored free for 15 days, shipped as one consignment with documents.

Small-batch sourcing questions

The answers buyers ask for before the first order.

Yeatru Sourcing accepts custom and private-label orders from 50 pieces per SKU, and stock catalogue items from 1 piece. Mixed SKUs from different factories can be consolidated into a single shipment.

Yes. Logo printing and custom labels are viable from 50–100 pieces on ready-made products. Private-label packaging is quoted from roughly 200–500 pieces, and custom molds typically start at 1,000–3,000 pieces.

The service fee is 5–8% of order value for regular sourcing and 8–12% for OEM or private-label work. Orders below USD 1,000 carry a 10% low-order surcharge plus a USD 50 handling fee, and samples are USD 50 per SKU refundable on the first purchase order. Factory unit price and shipping are itemised separately.

The unit price is usually lower at 500 pieces because the factory spreads setup and printing costs, but a 50-piece run needs less cash and leaves less dead stock. We quote both quantities so you can compare landed cost per unit before deciding.

Yes. Many of our clients place their first China order with us — 200+ buyers in 50+ countries since the company was registered in Yiwu on 21 February 2022. A first order starts with a written brief, a factory shortlist and a paid sample before any production payment.

Yes. For a new brand we prepare the product spec sheet, review label and packaging artwork, check the certification route for the destination market, and run the first production batch through AQL 2.5 inspection.

Send product photos or a reference link, target quantity, target landed price, destination country and any certification requirement. A written quotation with unit price, MOQ, lead time, Incoterms and commission is returned within 24 hours.

Every batch is inspected before the balance payment under AQL 2.5 Level II, with dated photos and a written report. Amazon FBA orders can also be checked piece by piece for FNSKU labelling, polybag warnings and carton marking.

The importer of record remains legally responsible, but we flag the applicable rules before production — CE, REACH, EN71, UKCA and GPSR — and coordinate the lab tests and documents the factory must supply. GPSR also requires an EU-based responsible person and traceability details on the product or packaging.

Yes. Small batches move by air or express under DDP terms to 50+ countries, including Amazon FBA warehouses. Duty, import VAT and last-mile delivery are quoted per shipment against your address and HS code.

We negotiate a trial run, split the order across colours or sizes already scheduled, or move the enquiry to a factory whose line suits shorter runs. If none of that works, we tell you the real minimum instead of promising an MOQ the factory cannot hold.

No. We also act as a Yiwu buying arm for established wholesalers, distributors and private-label brands that want sourcing, inspection and consolidation without the fixed cost of a full buying office.

Tell us the quantity you had in mind

50, 100 or 500 — we will tell you what is realistic for the product, the factory and the market. No obligation until you confirm an order.

WhatsApp +86 159 8851 6408 · info@yeatru.com · Yiwu, Zhejiang, China

Data Management