Case Studies

Real sourcing engagements from Yeatru Sourcing — small orders, quality control, and consolidated shipping across 50+ countries.

Yeatru is not a category specialist. We source whatever the buyer's business already sells. The cases below span plush toys, apparel, salon supplies, home décor, ceramics, stone planters, instruments and packaging — those are examples of what has been ordered, not a list of what we accept. If a product can be quoted by a Chinese factory or bought in Yiwu, it goes through the same process.
Verified data only. Order numbers, unit prices and totals below are taken from the actual proforma invoices and quotation sheets. Client names and logos are omitted.
Amazon Europe launch First SKU United States · Buyer Home textile · Entry doormat

US client: first product for an Amazon Europe brand

A US-based seller launching a new brand on Amazon Europe needed one product taken from project set-up to a shipped batch before widening the range.

Brief

  • Product: entry doormat, first SKU of a new Amazon Europe brand
  • Scope: project set-up, specification alignment, factory coordination, pre-shipment inspection and export shipment
  • Requirement: a batch that could be inspected on the factory floor before the balance payment

What Yeatru delivered

  1. Project set-up: product brief, target specification and inspection points agreed in writing before sampling.
  2. Factory coordination: specification and artwork checked against the factory's actual capability, not against a catalogue photo.
  3. On-site inspection: production run inspected at the doormat factory with dated photographs and a written report. The inspection gallery is published on the quality control page.
  4. Shipment: export documents prepared and the batch shipped to the client.

Verified order data

  • Product: microfibre entrance mat, model PC00010, 60 × 90 cm, 10 mm thick, sand mélange (colour matched to the approved sample)
  • Quantity: 500 pieces
  • EXW unit price: USD 4.00
  • Line items on the proforma invoice (DF260812, dated 12 Aug 2026): product USD 2,000.00 · 500 custom wash labels USD 25.00 · delivery to Guangdong export hub USD 135.00
  • Proforma total: USD 2,160.00
  • Payment term: balance settled before shipment (after the pre-shipment inspection was approved)

Outcome

The first SKU was produced, inspected and shipped — giving the brand a real product to launch with before committing to a larger range.

Brand owner Shipped Lithuania · Founder First product · Own brand

Lithuania brand owner: developing the brand's first product, from spec sheet to shipment

A Lithuanian founder building his own brand from zero needed a first product he could actually manufacture. Yeatru developed that first product with him — specification, label artwork, production follow-up and shipment — not a private-label rebadge of an existing catalogue item.

Brief

  • Client type: brand owner / founder, not a distributor
  • Product: a multi-item set sold under the client's new own brand — the brand's first product
  • Scope: product specification, label artwork, production follow-up and shipment
  • Requirement: one document set that the factory, the printer and the founder could all work from

What Yeatru delivered

  1. Spec sheet: materials, dimensions, quantity per set and packing written by our team so every supplier quoted the same product.
  2. Label design: label artwork prepared in-house for the client's brand, then checked against the packaging before printing.
  3. Production follow-up: factory liaison through production and packing.
  4. Shipment: the finished set shipped to the client.

Verified order data

  • Set series: YCS-LTW-902A — a 7-component set for the client's own brand, all components in black
  • Components specified by Yeatru (component code / description): YCS-LTW-902A-001 stainless-steel piece (58 × 2 pcs, 1.2 mm) · YCS-LTW-902A-002-1 reusable DIY FRESH seal bags · YCS-LTW-902A-002-P 1200 ml stand-up pouch · YCS-LTW-902A-003 pack of 20 · YCS-LTW-902A-003-P 210D small thin drop bag · YCS-LTW-902A-004-P 210D large bag (30 × 35 cm) · YCS-LTW-902A-005 organizer pouch
  • Spec sheet delivered: table with component, image, description, specification, colour and per-set quantity — the single document the factory, the printer and the buyer all worked from
  • Label artwork: contents list plus a safety warning block. The warning states the set is not a toy, activated-charcoal pouches must not be opened or ingested, and the product must be kept away from fire

Outcome

The brand's first product was produced and shipped with Yeatru's own specification and label documents, which remain the reference for the founder's repeat orders.

Pre-production trial Quoted Slovenia · EU Plush toys · 10 SKUs

Slovenia client: 16-piece, 10-SKU plush trial with a custom hanger card

A Slovenian buyer tested ten plush SKUs — four characters in two sizes and two four-piece sets — before committing to a production batch, and needed the retail hanger card produced to their own artwork.

Verified quotation data

  • Quotation YCS261015SL02, dated 15 October 2026
  • YCS-PTY-LXH001K four-piece set, 8 × 3 × 10 cm, 20 g — USD 2.16 per set
  • YCS-PTY-LXH002 four characters, 24 cm / 225 g — USD 2.89 each (4 pcs); 45 cm / 740 g — USD 6.42 each (4 pcs)
  • YCS-PTY-LXH003K four-piece set, 16 cm, 60 g — USD 6.02 per set
  • Custom hanger card with assembly, labour and repack — USD 0.56 × 16
  • Goods USD 47.57 + hanger cards and repack USD 8.96 = USD 56.53 total

Compliance work before production

CE marking, EN 71-1/-2/-3 test reports, a technical file and GPSR safety information, plus a check on Slopak packaging producer responsibility and EU EORI before the order was quoted. Full detail on the Slovenia country page.

Mixed basket Shipped Belgium · EU 3 product types · 120 pcs

Belgium client: 120-piece, three-SKU basket shipped air express

Three product types with three different compliance profiles — a prayer rug, a rechargeable USB wudu washer and a Bluetooth zikr ring — consolidated into one 31 kg air shipment.

Verified quotation data

  • Quotation YCS261011BL32, dated 28 September 2026
  • YCS-FPM-146 cushioned prayer rug, 70 × 110 cm, 289 g — USD 3.35 × 40 = USD 137.20
  • YCS-WSM-522 rechargeable USB wudu washer, 335 g — USD 3.53 × 40 = USD 147.06
  • YCS-DSR-601 smart zikr ring, 60 g, sizes 18 / 20 / 22 split 12 / 18 / 10 — USD 6.68 × 40 = USD 280.05
  • Product cost USD 564.31 + 10% service fee USD 56.43 + air express 31 kg USD 299.30 = USD 920.04 delivered

Compliance work before production

Tri-language consumer information (Dutch / French / German), Fost Plus packaging EPR, Bebat battery EPR and Recupel WEEE registration, RED for the Bluetooth ring and EMC / low-voltage for the USB washer. Full detail on the Belgium country page.

Small batch Shipped Norway · EEA Plush · Neck-hanging

Norway client: sloth-shaped plush toy that hangs around the neck

A Norwegian buyer wanted a sloth plush designed to be worn around the neck, with the weight built into the arms so it hangs correctly. The brief was a full specification, not a catalogue pick. The order has been produced and shipped.

Verified order data

  • Unit price: USD 7.26 per piece, EXW — freight excluded, based on the buyer's full specification including the weight in the arms and the dimensions
  • Packaging: standard vacuum packing in cartons of 55 × 40 × 50 cm; the buyer asked for a simple dust bag, no logo
  • Destination: Son, Norway — a DDP price was quoted alongside the EXW price, calculated separately because the shipment is charged on volumetric weight
  • Status: produced and shipped

What has to be right before production

  • EN 71-1/-2/-3 test reports and CE marking: the toy is aimed at children, so the small-parts and seam-strength tests matter most on a neck-worn item
  • GPSR safety information and warnings, supplied in Norwegian for the EEA market
  • Norway is in the EEA but outside the EU customs union, so DDP is quoted as its own leg with 25% Norwegian import VAT — not the same calculation as an EU shipment

Why this case matters

A plush toy is not a commodity order when it has to hang on a body: arm weighting, seam strength and the strap or loop attachment all change the specification and the unit price. The EXW quote is fixed; the DDP freight estimate is calculated separately because the shipment is charged on volumetric weight, not actual weight.

Norway procurement page — MVA, EEA product rules and freight lanes

Multi-category client Shipped Australia · Buyer Hair, décor, ceramics, pots, instruments

Australia client: one sourcing channel across a hair-extension salon and a garden-décor wholesale business

An Australian client runs two businesses — a hair-extension salon and a garden-décor wholesale operation — and in September 2026 sent three separate quotation lists through the same account. The lines do not resemble each other at all: salon consumables, décor, ceramics, planters, even instruments.

What has already shipped under this account

  • Salon side: wigs, hair accessories (hair ties, extension-tying rings, clips, durags), jewellery and necklace lines, hair tools and salon equipment such as the hair-dressing trolley
  • Wholesale side: outdoor and indoor home décor — faux cowhide rugs, lanterns, woven baskets and wall hangings, coconut-shell and acacia tableware, ceramic urns and vases, travertine and magnesium-oxide planters, display risers
  • Two unrelated inventories, one supplier channel, one consolidation point

Verified order data — three proforma invoices

  • PI YCS260908A2 (8 September 2026), salon side: hair ties and hair-extension tying rings in 10 cm / 11 cm, pearl necklaces, durags, 14 cm hair clips, and a hair-dressing trolley (40 × 28 × 86 cm, 15 kg). Goods USD 880.85 + 7% service fee USD 61.66 = USD 942.51.
  • PI YCS260923A2 (23 September 2026), décor side: faux cowhide rugs in eight sizes from 80 × 120 cm to 200 × 300 cm, a rechargeable antique-bronze lantern, conga drum sets (acacia, Toona wood and rubberwood, 10" + 11", some with REMO heads and stands), water-hyacinth and seagrass baskets, a 3.5 m artificial coconut tree and a faux sago palm.
  • PI YCS260928A2 (28 September 2026), expanded list: the same décor lines plus seagrass trivets in seven diameters, coconut-shell bowls, an acacia cake stand, a full ceramic range (urns, vases, planters, pastry stands, decorative teapots and a trophy), travertine outdoor pots by weight, magnesium-oxide and fibreglass planters up to 90 cm, foldable display risers for exhibitions, woven-grass wall hangings and wooden storage boxes.

Why this account is the point

  • The categories do not share a compliance profile. Salon consumables, glazed ceramics, stone planters and a wooden drum cannot share one label, one test report or one HS code.
  • They do not share freight economics either. Hair accessories are light and high-value; travertine pots are quoted by the tonne and priced on weight; artificial trees and display risers are volumetric.
  • One account still consolidates. Supplier vetting, quotation, QC booking and the Yiwu consolidation warehouse are the same process for all three lists — which is exactly why a sourcing agent is not a category specialist.

Why this case matters

This is the clearest answer to "what products do you source?": whatever the buyer's business already sells. Yeatru did not choose hair or garden décor as a specialty — the client's two businesses did, and the same sourcing process covered both.

Australia procurement page — GST, biosecurity and freight lanes

Featured Case: Kuwait Men's Padded Vest Sourcing

Small Order (100 pcs) Arabic-Speaking Client Kuwait · Middle East Men's apparel · Padded

Client & Product

  • Client: Kuwaiti buyer, first-time China buyer — writes in Arabic and also works in English
  • Product: Men's padded (thickened) vests
  • Quantity: 100 pieces (MOQ 100, mixable 50+50 across models)
  • Budget: USD 17.00 per piece
  • Delivery: DDP shipping to Kuwait

Client's brief (written in Arabic, summarised here)

  • Wants to wholesale men's padded vests, around 100 pieces, with a budget of about USD 17 per piece.
  • Asks what the minimum order is, and whether models can be mixed within one order.
  • Asks whether samples can be ordered before committing to the bulk order.

Yeatru response & process

  1. MOQ & pricing confirmed: 100-piece minimum, mixable across models (e.g. 50 + 50). Mixing colours and sizes at no extra charge. The USD 17/pc budget was achievable from verified Yiwu and Guangzhou factories.
  2. Logistics: DDP door-to-door shipping to Kuwait — duty, tax, customs clearance, and last-mile delivery included.
  3. Samples first: Sample fee USD 5–10/piece (refundable on first bulk order). Shipped via DHL/FedEx, 3–7 days delivery.
  4. Payment: Sample payment via PayPal or bank transfer (T/T). Samples shipped within 1–2 days of payment.
  5. Next step: After sample approval, mass production starts.

Why this case matters

This is a typical first-time small-order buyer from the Middle East. The buyer wrote in Arabic and also works in English, so the conversation ran bilingually; Yeatru confirmed a 100-piece MOQ with model mixing and arranged full DDP shipping to Kuwait, including customs clearance and last-mile delivery.

Kuwait procurement page — KUCAS, G-Mark, Arabic labelling and freight lanes

Amazon FBA Small Order

Case 1: Amazon FBA Small-Batch Sourcing

Buyer profile: First-time Amazon seller, US-based, sourcing a home & kitchen product with no existing China supplier relationship.

What the buyer needed

  • Identify 3–5 real manufacturers (not trading companies) for a kitchen gadget
  • Confirm MOQ under 500 pieces for first test order
  • Pre-shipment QC before goods leave China
  • FBA-ready packaging with FNSKU labels applied
  • DDP shipping to an Amazon US fulfillment center

Yeatru process

  1. Sourcing: Market visit in Yiwu + online factory outreach. Collected 8 quotes, filtered to 4 factories with valid business licenses (SAMR verified).
  2. Sample: Ordered samples from 3 factories. Tested for material, function, and packaging quality.
  3. Negotiation: Compared quotes; negotiated MOQ and unit price with the selected factory.
  4. Production follow-up: Scheduled in-line check and pre-shipment inspection at the factory.
  5. QC: AQL 2.5 inspection — checked product function, labeling, packaging, and count. Defects documented with photos.
  6. FBA prep: Applied FNSKU labels, bubble-wrapped fragile items, palletized per Amazon requirements.
  7. Shipping: DDP sea freight to Amazon US warehouse with customs clearance and duty prepaid.

Outcome

Buyer received FBA-ready inventory. Inspection report and shipping documents provided. Follow-up reorder placed after successful Amazon listing launch.

Quality Issue QC Inspection

Case 2: Pre-Shipment Quality Issue Resolution

Buyer profile: DTC brand owner who had already paid a deposit to a factory before engaging Yeatru for QC only.

The problem

The buyer ordered a branded consumer product. Before final payment and shipment, they requested a third-party pre-shipment inspection.

Inspection findings

  • AQL 2.5 sampling at the factory warehouse
  • Defects found: inconsistent logo printing (offset), color mismatch vs approved sample, and 5% of units missing accessories
  • Defect rate exceeded AQL 2.5 acceptance threshold

Resolution

  1. Detailed QC report with photos sent to buyer and factory
  2. Negotiated with factory: sorting of affected batch, re-printing of defective units, replacement of missing accessories
  3. Re-inspection after factory rework
  4. Release for shipment only after second inspection passed

Outcome

Buyer avoided receiving defective inventory. The cost of two inspection days was a fraction of what a return, rework, or Amazon suspension would have cost. Buyer now includes pre-shipment QC in every PO.

Consolidation Multi-Supplier

Case 3: Multi-Supplier Consolidation Shipping

Buyer profile: Wholesale importer building a mixed-SKU order from 6 different Yiwu suppliers.

The challenge

Sourcing from multiple suppliers means multiple shipments, higher per-unit freight cost, and customs complexity for each separate container or LCL shipment.

Yeatru solution

  1. Coordinated 6 suppliers to deliver goods to Yeatru's Yiwu consolidation warehouse
  2. 15-day free warehousing while all suppliers delivered
  3. Checked each supplier's goods against PO upon receipt (quantity, packaging, labels)
  4. Consolidated all goods into one LCL shipment
  5. Single customs declaration and DDP delivery to buyer's warehouse

Result

Buyer received one consolidated shipment with one set of documents instead of six separate shipments. Reduced shipping paperwork, customs fees, and last-mile delivery complexity.

Promo Copy

Share these cases: ready-to-post LinkedIn & X copy

Verified-order copy for the doormat and Lithuania-set cases above, focused on GPSR label compliance and AQL 2.5 on-site inspection as a payment gate. Copy any block from the dedicated page.

Highlight hook (LinkedIn post A):

"At Yeatru Sourcing we see the same mistake on almost every first China order: the buyer negotiates the unit price, then skips label compliance and pre-shipment inspection. Two small-batch runs we shipped this quarter — a 500-pc doormat for a US Amazon Europe seller (inspected before balance release) and a 7-piece own-brand set for a Lithuanian founder building his first brand (GPSR-compliant safety label checked before print). Compliance is a pre-print decision; inspection is a payment gate."

Open all 7 ready-to-post blocks

Have a similar sourcing challenge?

Tell us your product, quantity, and destination. We'll outline which of our sourcing, QC, or consolidation services apply.

Get a Free Quote
Data Management